DIY battery cables
Bracing the floppy floppy cargo cover
Update and such
It's been a bit since I've made an update. Largely because I've been working with dirty metal and stopping to take pics with the ipad tends to get it all sorts of dirty. So I need to figure out a way to keep the ipad clean but still get decent pics.
I'm gonna order a case and a screen protector and hope for the best. I have built a welding cart, a garden table and will be doing a coffee table for a friend soon. So I'll try to get some pics of that.
Weld weld weld
All right, getting my welder hooked up. Jumping right in to my first little project. Exhaust.
Up front strutting
The continuation of the suspension work. This time sorting out the front.
Finally done with it, so let’s just get right in to the write up while I still have the energy.
Control your arms, on the down low. + springy struttin
On with the show.
Rear trailing arm bushing replacement. The red donut!
The bushing in my rear trailing arm was shot so I decided to put in these from energy suspension. It is fortunately not an overly complicated task to get this Japanese sex toy looking thing into the rear trailing arm, though it is a bit of a drawn out process.
The flasher! Flashing brake light
Maybe it annoys you, that's probably a good thing as it means it got your attention.
This is an install of a flasher module for the high mount brake light in the civic wagon. And subsequent install of a resistor to get the light to work correctly.
Led headlights, are they any good?
LED technology has progressed to the point that it's viable for use in vehicle headlights. Higher end newer cars are using them, but how do the eBay kits hold up? I've seen some sell for a couple hundred and I'm sure could go higher. These ones I've picked up for around $80 at the time this was written.
Switchback turn signal/running lights from superbrightleds.com
O.k. So the idea behind this is you have a dual purpose bulb. I wanted some brighter attention getting running lights as well as just a nice bright turn signal.
You can see on the bulb itself it actually has two arrays of LEDs. The yellow ones are bright white. The orange ones are the amber. The effect is pretty awesome. On with the install.